THERMO-SHIELD Application Scopes

The use of liquid insulation THERMO-SHIELD

Liquid heat-insulating coating THERMO-SHIELD designed for hydro-therma and noise isolation structures for industrial and domestic purposes of any form, for interior and exterior surfaces of buildings, foundations, heating mains, pipes and any other network and infrastructure, tanks, road, rail and other transport , metal structures, and others, both in the process of their construction and renovation.

The coating THERMO-SHIELD has good frost resistance (down to -50 ° C), it can be used as thermal insulation freezers, with reduced labor costs for building insulation layer of foam boards and waterproofing layer of tar paper and foil.

THERMO-SHIELD used to reduce heat loss, and thus the consumption of heat carrier which leads to increased efficiency of heat carrier, reduce losses on its delivery, more economical use in heating.

THERMO-SHIELD during coating application to external or internal walls of the building, the energy consumption for space heating in the cold season reduced by at least 30%. Are eliminated: condensation, mold, excessive cooling and freezing of the walls.

THERMO-SHIELD used to treat auto body refrigerators, achieving significant cost heat carrier in the winter and reduce heating from solar radiation in the summer.

Shipowners handle with THERMO-SHIELD their ships and boats, seeking at once hydro-thermal and noise isolation.

At the enterprises of the production sphere THERMO-SHIELD is used as a universal insulator for their products, which have a complex geometry.

THERMO-SHIELD used:

- in insulation of buildings and structures that have been built on old projects

- with insulation basements

- with insulation freezing walls

- with insulation inter-panel joints

- as protection against condensation

- as protection against the appearance of mold and mildew

- as corrosion protection

- installation of ventilated facades

- for insulation of ventilation systems

- with roof insulation

- with insulation of foundations

- for insulation of tanks

- with insulation rail cars

- vehicles with insulation

- insulation at livestock farms

- with insulation containers

-with insulation garages

- with insulation tunnels

- with insulating gas compressor units

- with insulation easy-constructed structures

- at warming gas pipelines and steam-wires

- with thermal insulation electrical and communication networks

- with the heat and noise insulation hydro river and sea vessels and boats.

And also when the use of other types of insulation is impossible or difficult.

Characteristics.THERMO-SHIELD

Characteristics of the Thermal Insulation THERMO-SHIELD

THERMO-SHIELD is a liquid pasty mass of gray (can be changed), consisting of ceramic beads, up to 100 microns, and a binder (acrylic polymer structured and dispersed polysiloxane).

Binder is a molecular sieve, transmits vapor molecules and do not miss the water molecules, so the polymerized coating pellicle of  THERMO-SHIELD "breathes." Since the binder is an aqueous dispersion, THERMO-SHIELD in a liquid form afraid freezing.

Due to its high content of polymeric material with hollow ceramic micro-spheres, filled with an inert gas, cover THERMO-SHIELD has low thermal conductivity, the ability to reflect 75% of incident light rays and dissipate up to 95% of infrared radiation. These properties contribute to the excellent conservation of heat in the premises, protection from solar radiation, overheating of premises and the roof surface

Coating of THERMO-SHIELD has a good hydrophobicity, chemical and biological stability. The structure of THERMO-SHIELD includes inhibitors that prevent the formation of rust.

THERMO-SHIELD eliminates: fungus, excessive cooling and freezing of the walls, condensation and rust.

Coverage THERMO-SHIELD has a good adhesion to steel, plastic, concrete, brick, wood and other surfaces (except polyethylene).

THERMO-SHIELD after polymerization forms a strong sufficiently flexible pellicle with a thickness of 0.5 - 3.5 mm (selected on the basis of the requirements of the object).

Physical and technical specifications insulation THERMO-SHIELD:

Thermal conductivity (W / m ° K), no more than	0.0025
Coefficient of heat transfer from the outer surface of the insulation (W/m2 ° K)	1.5
Drying time at 20 ° C, h.	24
Operating temperature range, ° C	-50 to +220
Strength at break,kg/cm2	8.7
Elongation at break,%, at least	1.2
Density, g/cm3	0.7 - 1.5
Contents of dry matter,%	40 - 70
Water absorption of the cover for 24 hours,% by weight, not more than	15.0
Water vapor permeability cover , mg / (m * year * Pa), not more than	0.02
Coating adhesion, MPa, not less - to steel - to concrete	0.6 1.0

Comparative table of thermal conductivity:

Material	The coefficient of thermal conductivity	The heat transfer coefficient	The layer thickness
Slabs of mineral wadded	0.046	8	5 cm
polyurethane foam plastic	0.04	11	3.6 cm
Heat Insulation «URSA»	0.042	8	3.7 cm
THERMO-SHIELD	0.0025	1.5	1 mm

The advantages of thermal insulation material THERMO-SHIELD:

1. High heat-saving properties.

2. No need to build additional coating (tin-plate, plastic, etc.).

3. No need for an additional vapor barrier.

4. Visibility destruction of THERMO-SHIELD covered surfaces (gusts of pipelines, tanks, etc.).

5. Ease of application (brush, roller, spray gun, high pressure spray)
and, as a consequence, the low cost of works on applying of insulation.

6. The possibility of applying THERMO-SHIELD to the surface of any geometrical shape.

7. The possibility of staining THERMO-SHIELD in any color.

8. THERMO-SHIELD does not increase the load on structures.

9.  Does not change the geometry of the room, because thickness of the
coating THERMO-SHIELD measured in millimeters, not centimeters, as with
the standard types of insulation.

10. When THERMO-SHIELD coating is damaged , it is easily restored,  if necessary..

11. Not a viable habitat for pests (rodents, insects).

12. No interest to the criminal persons as a secondary product.

THERMO-SHIELD - environmentally friendly and safe insulation material.

Fireproof. Does not support combustion, prevents the formation and spread of flame.

THERMO-SHIELD can be applied for the coating of the surface with a temperature of +5 ° C to +90 ° C.

Storage and transport THERMO-SHIELD is not below +5 ° C (with freezing in liquid form - loses properties!.)

Warranty: 7 years.

Absence of mechanical damage to the coating, the life is not limited.

THERMO-SHIELD. Application examples

Some examples of the use of polymer-mineral composition "THERMO-SHIELD" 1. Preparing of the passenger wagon for inflicting of "THERMO-SHIELD"



2. "THERMO-SHIELD" on the inner surfaces of the passenger wagon



3. "THERMO-SHIELD" in the process of inflicting for passenger wagons

4. "THERMO-SHIELD" on passenger wagons outside


5. "THERMO-SHIELD" on freight wagons

6. "THERMO-SHIELD" on internal and external surfaces. 40-foot sea container


7. "THERMO-SHIELD" on vessels with liquefied gas

8. "THERMO-SHIELD" on the tank with fuel and lubricants


9. "THERMO-SHIELD" basic storage containers for liquefied gases TNK 10. "THERMO-SHIELD" basic storage containers for liquefied gases TNK 11. "THERMO-SHIELD" basic storage containers for liquefied gases TNK12. "THERMO-SHIELD" on the bitumen tank















13. "THERMO-SHIELD" on the pipeline and flange Gate valves in basement room house

14. "THERMO-SHIELD" on pipelines in the boiler room 

15. "THERMO-SHIELD" on pipelines and flanged gate valves in the boiler room16. "THERMO-SHIELD" on pipelines in the boiler room 17."THERMO-SHIELD" on the community pipeline hot water18. "THERMO-SHIELD" on the floor of the warehouse20. "THERMO-SHIELD" on the office building (renovation of the building)

19. "THERMO-SHIELD" in an office building (capital repairs of the building)

21. "THERMO-SHIELD" on a building (current repairs of buildings)22. Children's City Clinical Hospital in Dnepropetrovsk. "THERMO-SHIELD" on a building23. Infliction of "THERMO-SHIELD" on a metal roof (current repair facilities)24. Inflication of "THERMO-SHIELD" on the metal wall of the hangar 25. "THERMO-SHIELD" on the metal gate26. "THERMO-SHIELD" on road tankers

27. "THERMO-SHIELD" on a metal ladder platform in explosive dangerous environment. This material prevents friction spark formation28. "THERMO-SHIELD" on a metal ladder in explosive dangerous environment. This material prevents friction spark formation29. "THERMO-SHIELD" on metal vent pipe in fire and explosion dangerous premises. This material prevents friction spark formation30. "THERMO-SHIELD" on the superstructure of the vessel

31. Inflication of "THERMO-SHIELD" in the ship's hold32. Inflication of "THERMO-SHIELD" in a car