Tuesday, March 5, 2013

Characteristics.THERMO-SHIELD


Characteristics of the Thermal Insulation THERMO-SHIELD



THERMO-SHIELD is a liquid pasty mass of gray (can be changed), consisting of ceramic beads, up to 100 microns, and a binder (acrylic polymer structured and dispersed polysiloxane).

Binder is a molecular sieve, transmits vapor molecules and do not miss the water molecules, so the polymerized coating pellicle of  THERMO-SHIELD "breathes." Since the binder is an aqueous dispersion, THERMO-SHIELD in a liquid form afraid freezing.

Due to its high content of polymeric material with hollow ceramic micro-spheres, filled with an inert gas, cover THERMO-SHIELD has low thermal conductivity, the ability to reflect 75% of incident light rays and dissipate up to 95% of infrared radiation. These properties contribute to the excellent conservation of heat in the premises, protection from solar radiation, overheating of premises and the roof surface

Coating of THERMO-SHIELD has a good hydrophobicity, chemical and biological stability. The structure of THERMO-SHIELD includes inhibitors that prevent the formation of rust.

THERMO-SHIELD eliminates: fungus, excessive cooling and freezing of the walls, condensation and rust.

Coverage THERMO-SHIELD has a good adhesion to steel, plastic, concrete, brick, wood and other surfaces (except polyethylene).

THERMO-SHIELD after polymerization forms a strong sufficiently flexible pellicle with a thickness of 0.5 - 3.5 mm (selected on the basis of the requirements of the object).

Physical and technical specifications insulation THERMO-SHIELD:


Thermal conductivity (W / m ° K), no more than0.0025
Coefficient of heat transfer from the outer surface of the insulation (W/m2 ° K) 1.5
Drying time at 20 ° C, h.24
Operating temperature range, ° C -50 to +220
Strength at break,kg/cm28.7
Elongation at break,%, at least1.2
Density, g/cm30.7 - 1.5
Contents of dry matter,%40 - 70
 Water absorption of the cover for 24 hours,% by weight, not more than 15.0
Water vapor permeability cover , mg / (m * year * Pa), not more than0.02
Coating adhesion, MPa, not less
- to steel
- to concrete

0.6
1.0

Comparative table of thermal conductivity:


Material
The coefficient of thermal conductivity
The heat transfer coefficient
The layer thickness
Slabs of mineral wadded
0.046
8
5 cm
polyurethane foam plastic
0.04
11
3.6 cm
Heat Insulation «URSA»
0.042
8
3.7 cm
THERMO-SHIELD
0.0025
1.5
1 mm


The advantages of thermal insulation material THERMO-SHIELD:

1. High heat-saving properties.
2. No need to build additional coating (tin-plate, plastic, etc.).
3. No need for an additional vapor barrier.
4. Visibility destruction of THERMO-SHIELD covered surfaces (gusts of pipelines, tanks, etc.).
5. Ease of application (brush, roller, spray gun, high pressure spray)
and, as a consequence, the low cost of works on applying of insulation.
6. The possibility of applying THERMO-SHIELD to the surface of any geometrical shape.
7. The possibility of staining THERMO-SHIELD in any color.
8. THERMO-SHIELD does not increase the load on structures.
9.  Does not change the geometry of the room, because thickness of the
coating THERMO-SHIELD measured in millimeters, not centimeters, as with
the standard types of insulation.
10. When THERMO-SHIELD coating is damaged , it is easily restored,  if necessary..
11. Not a viable habitat for pests (rodents, insects).
12. No interest to the criminal persons as a secondary product.

THERMO-SHIELD - environmentally friendly and safe insulation material.
Fireproof. Does not support combustion, prevents the formation and spread of flame.
THERMO-SHIELD can be applied for the coating of the surface with a temperature of +5 ° C to +90 ° C.
Storage and transport THERMO-SHIELD is not below +5 ° C (with freezing in liquid form - loses properties!.)
Warranty: 7 years.
Absence of mechanical damage to the coating, the life is not limited.

No comments:

Post a Comment